Anesthetic Equipment and Monitoring Practice Questions

Q: Which of the following is the most commonly used objective method for monitoring depth of anaesthesia in modern practice?

Bispectral Index (BIS). ***Bispectral Index (BIS)*** - The **Bispectral Index (BIS) monitor** is the most widely adopted and studied objective method for assessing the hypnotic component of anesthesia depth. - It processes **electroencephalogram (EEG) signals** into a dimensionless number (0-100) to indicate the patient's level of consciousness, with lower numbers typically indicating deeper anesthesia. *Electromyography (EMG) monitoring* - **EMG monitoring** primarily assesses **neuromuscular blockade**, not the depth of anesthesia itself. - While muscle relaxation is part of general anesthesia, EMG specifically measures the response to nerve stimulation to gauge the degree of **paralysis**. *Heart rate variability (HRV) monitoring* - **Heart rate variability (HRV)** reflects the balance of the **autonomic nervous system** and can be influenced by various factors, including stress, pain, and anesthetic agents. - While it offers some insight into autonomic responses to anesthesia, it is not a direct or primary measure of the **hypnotic depth** of anesthesia. *End-tidal CO2 monitoring* - **End-tidal CO2 (EtCO2) monitoring** is critical for assessing **ventilation adequacy** and confirming correct endotracheal tube placement. - It does not directly measure the **depth of consciousness** or brain activity related to anesthesia.

Q: Which nerve is commonly tested to assess the adequacy of anaesthesia?

Ulnar Nerve. ***Ulnar Nerve*** - The **ulnar nerve** is commonly used in clinical practice to assess the adequacy of neuromuscular blockade because it is a **superficial nerve** that is easily accessible and stimulated. - Stimulation typically occurs at the wrist, and the muscular response (adduction of the thumb or fifth finger twitch) is readily visible and quantifiable via a **train-of-four (TOF) monitor**. *Median Nerve* - While the median nerve can be stimulated, it is **less commonly used** for routine monitoring of neuromuscular blockade compared to the ulnar nerve. - Its stimulation may cause **unwanted deep muscle twitches** which are harder to observe and quantify. *Radial nerve* - The radial nerve is generally **not preferred for routine neuromuscular monitoring** because stimulating it can lead to more diffuse muscle contractions and inconsistent responses, making assessment less reliable. - Its motor response, primarily wrist and finger extension, is **more complex downstream** than the simple adduction of the thumb/fifth finger. *Mandibular nerve* - The mandibular nerve is a branch of the **trigeminal nerve** and controls muscles of mastication; it is **not used for assessing general anaesthesia** or neuromuscular blockade. - Testing this nerve would be relevant for conditions affecting the head and neck, not for monitoring muscular paralysis during surgery.

Q: What is the purpose of Murphy's eye in an endotracheal tube?

Prevent complete obstruction. ***Prevent complete obstruction*** - **Murphy's eye** is a small hole located on the distal tip of the endotracheal tube, allowing for alternative airflow if the **beveled tip** becomes occluded against the tracheal wall. - This design feature provides a safety mechanism, ensuring continued ventilation even if the primary opening is obstructed. *Facilitate suctioning* - While suctioning is performed through the endotracheal tube, the **Murphy's eye** itself is not primarily designed to facilitate this process. - **Suction catheters** are typically advanced through the central lumen of the tube, bypassing the eye. *Reduce risk of tube occlusion* - This option is partially correct, but it's important to distinguish the specific mechanism: Murphy's eye prevents *complete* obstruction rather than broadly reducing the *risk* of all types of occlusion. - The main purpose is to maintain an airway if the main lumen is blocked by contact with the tracheal wall and does not prevent occlusion by secretions or kinking. *Humidify inspired gases* - The **Murphy's eye** is a structural part of the endotracheal tube and plays no role in the humidification of gases. - Humidification is achieved through external devices like **heat and moisture exchangers (HMEs)** or powered humidifiers attached to the breathing circuit.

Q: Which is the most effective circuit in spontaneous anaesthesia?

Mapleson A. ***Mapleson A*** - The **Mapleson A circuit** is highly efficient for **spontaneous ventilation** due to its unique design, allowing exhaled gases to preferentially exit through the expiratory valve and preventing rebreathing of CO2. - Its efficiency stems from the **fresh gas flow** being directed close to the patient, ensuring exhaled CO2 is effectively flushed away during expiration while fresh gas is accumulated for inspiration. *Mapleson B* - **Mapleson B circuits** are less efficient for spontaneous ventilation compared to Mapleson A, requiring higher fresh gas flows to prevent rebreathing. - The expiratory valve is placed close to the patient, but the fresh gas inlet is further away, making washout of exhaled CO2 less effective. *Mapleson C* - **Mapleson C circuits** share similarities with Mapleson B in terms of fresh gas inlet and expiratory valve placement but have a shorter corrugated tubing, making them even less efficient for spontaneous ventilation. - They are primarily used for short procedures or during transport due to their compact size, despite their inefficiency in clearing CO2 during spontaneous breathing. *Mapleson D* - **Mapleson D circuits** are highly effective for **controlled ventilation** due to their design, which allows for efficient fresh gas delivery and CO2 washout during positive pressure breaths. - However, for spontaneous ventilation, they are less efficient than Mapleson A, as the fresh gas flow and expiratory valve placement do not optimally prevent rebreathing without higher fresh gas flows.

Q: What is the composition of soda lime?

4% NaOH, 80% Ca(OH)2, trace elements, 15% H2O. ***4% NaOH, 80% Ca(OH)2, trace elements, 15% H2O*** - **Soda lime** is primarily composed of **calcium hydroxide (Ca(OH)2)**, typically around 80%, which acts as the main absorbent. - It also contains **sodium hydroxide (NaOH)**, around 4%, which serves as an activator, along with approximately 15% **water (H2O)** to facilitate the reaction, and **trace elements** like potassium hydroxide. *4% NaOH, 90% Ca(OH)2, 1% KOH, 5% H2O* - This option shows a higher percentage of **calcium hydroxide (90%)** and a lower percentage of **water (5%)** than the standard composition. - The reduced water content might impair the efficiency of **carbon dioxide absorption**. *4% NaOH, 80% Ca(OH)2, 1% KOH, 15% H2O* - While the percentages of NaOH, Ca(OH)2, and H2O are closer to correct, this option specifically mentions **potassium hydroxide (KOH)** as a distinct component at 1%, rather than general trace elements. - The standard composition usually encompasses trace elements more broadly, and specific percentages for KOH are not always highlighted as a primary component. *15% NaOH, 80% Ca(OH)2, trace elements, 4% H2O* - This composition incorrectly suggests a significantly higher percentage of **sodium hydroxide (15%)** and a critically low percentage of **water (4%)**. - A higher NaOH concentration can increase the risk of **carbon monoxide formation** from halogenated anesthetics, and inadequate water reduces absorptive capacity.

Q: What is the PRIMARY application of capnography during patient monitoring?

Correct intubation. ***Correct intubation*** - Capnography is the **gold standard** for confirming **endotracheal tube (ETT) placement** by detecting carbon dioxide in exhaled breath. - A persistent waveform indicates the ETT is in the **trachea**, while absence suggests esophageal intubation. *Pulmonary embolism* - While capnography can show a **decrease in end-tidal CO2 (ETCO2)** due to increased dead space in pulmonary embolism, it is not its primary or most definitive diagnostic application. - Other diagnostic methods like CT pulmonary angiogram are preferred for confirming pulmonary embolism. *Adequate ventilation* - Capnography provides information about **ETCO2 levels**, which can indirectly reflect adequate ventilation by showing CO2 elimination. - However, it's more direct application is intubation confirmation, and other measures like **tidal volume** and **respiratory rate** are also crucial for assessing overall ventilation. *Significant metabolic change* - Capnography can show changes in CO2 production reflecting metabolic rate, such as in **hypermetabolic states** (e.g., fever, sepsis) or hypometabolic states. - While useful for monitoring trends, its primary role is not for diagnosing such changes but rather intubation confirmation.

Q: Circuit of choice for controlled ventilation ?

Type D. **Type D** - The **Type D circuit** (also known as the **Bain circuit** or a modified Mapleson D circuit) is highly efficient for **controlled ventilation** due to its fresh gas flow entering near the patient, effectively sweeping away exhaled gases. - Its design maintains a relatively constant **expiratory resistance**, making it suitable for precise control of ventilation parameters. *Magill circuit* - The **Magill circuit** (Mapleson A) is efficient for **spontaneous ventilation** but requires a high fresh gas flow to prevent rebreathing during controlled ventilation. - During controlled ventilation, a high minute volume is required to flush out expired gases efficiently, which can be wasteful of anesthetic agents. *Type C* - The **Type C circuit** (Mapleson C circuit) is a simple system useful for **resuscitation** and short procedures but is inefficient for prolonged controlled ventilation. - It has a high resistance to gas flow and a tendency for significant rebreathing during both spontaneous and controlled breathing, leading to high CO2 levels. *Type E* - The **Type E circuit** (Mapleson E circuit) is a basic T-piece system, primarily used for **spontaneous breathing in infants and children**. - It lacks a reservoir bag and adjustable pressure limiting valve, making it unsuitable for controlling ventilation effectively in adults.

Q: Critical temperature of oxygen is?

-118°C. ***-118°C*** - The **critical temperature** is the temperature above which a gas cannot be liquefied, no matter how much pressure is applied. - For oxygen, its critical temperature is approximately **-118°C**, meaning it can only exist as a gas above this temperature, regardless of pressure. *400°C* - This temperature is significantly **above** the critical temperature of oxygen, so oxygen would always be a gas at this temperature. - It does not represent any specific physical property of oxygen in relation to its phase changes. *20°C* - This temperature is also well **above** oxygen's critical temperature, so oxygen would remain in its gaseous state. - This is approximately room temperature, where oxygen is commonly found as a gas. *36.5°C* - This is close to typical human body temperature and is far **above** the critical temperature of oxygen. - At this temperature, oxygen exists only as a gas.

Q: Critical temperature for liquid nitrogen is ?

-147°C. ***-147°C*** - The **critical temperature** is the temperature above which a gas cannot be liquefied, no matter how much pressure is applied. For **liquid nitrogen**, this value is approximately **-147°C**. - At temperatures above **-147°C**, nitrogen exists only in its gaseous phase. *36.5°C* - This temperature is close to **human body temperature** and is not relevant to the critical temperature of nitrogen. - Nitrogen would be in a gaseous state at this temperature and below its critical pressure. *-20°C* - While a low temperature, **-20°C** is still well above nitrogen's **critical temperature**. - At **-20°C**, nitrogen would be a gas unless subjected to very high pressures. *-242°C* - This temperature is below the **critical temperature** of nitrogen, but it is also below its **boiling point** of **-196°C**. - At **-242°C**, nitrogen would be a liquid, but this value is not its critical temperature.

Q: In which vein is Central Venous Pressure (CVP) most accurately monitored?

Internal jugular vein. ***Internal jugular vein*** - The **internal jugular vein** provides the **most direct and consistent access** to the superior vena cava and right atrium, where CVP is accurately measured. - Its straight course and reliable anatomical landmarks make it a preferred site for CVP catheter insertion. *Anterior jugular vein* - The **anterior jugular vein** is smaller and often has a more tortuous course, making consistent and reliable CVP monitoring difficult. - It is not typically chosen for central venous access due to its anatomical variability and smaller caliber. *External jugular vein* - The **external jugular vein** is superficially located and easier to access but often has valves and a more oblique angle to the subclavian vein, making catheter advancement to the central circulation challenging. - Catheter tip placement is less consistent for accurate CVP measurements compared to the internal jugular vein. *Inferior vena cava* - While the **inferior vena cava** eventually drains into the right atrium, access is typically via the femoral vein, which is associated with a higher risk of infection and deep vein thrombosis for long-term CVP monitoring. - Measurements from the inferior vena cava or femoral vein can be affected by **intra-abdominal pressure** and are not as accurately reflective of right atrial pressure as those from the superior vena cava.

Question 1

Which of the following is the most commonly used objective method for monitoring depth of anaesthesia in modern practice?

Accepted Answer

Bispectral Index (BIS)

Answer

Electromyography (EMG) monitoring

Answer

Heart rate variability (HRV) monitoring

Answer

End-tidal CO2 monitoring

Question 2

Which nerve is commonly tested to assess the adequacy of anaesthesia?

Accepted Answer

Ulnar Nerve

Answer

Radial nerve

Answer

Mandibular nerve

Answer

Median Nerve

Question 3

What is the purpose of Murphy's eye in an endotracheal tube?

Accepted Answer

Prevent complete obstruction

Answer

Reduce risk of tube occlusion

Answer

Humidify inspired gases

Answer

Facilitate suctioning

Question 4

Which is the most effective circuit in spontaneous anaesthesia?

Accepted Answer

Mapleson A

Answer

Mapleson B

Answer

Mapleson C

Answer

Mapleson D

Question 5

What is the composition of soda lime?

Accepted Answer

4% NaOH, 80% Ca(OH)2, trace elements, 15% H2O

Answer

4% NaOH, 90% Ca(OH)2, 1% KOH, 5% H2O

Answer

15% NaOH, 80% Ca(OH)2, trace elements, 4% H2O

Answer

4% NaOH, 80% Ca(OH)2, 1% KOH, 15% H2O

Question 6

What is the PRIMARY application of capnography during patient monitoring?

Accepted Answer

Correct intubation

Answer

Pulmonary embolism

Answer

Adequate ventilation

Answer

Significant metabolic change

Question 7

Circuit of choice for controlled ventilation ?

Accepted Answer

Type D

Answer

Magill circuit

Answer

Type C

Answer

Type E

Question 8

Critical temperature of oxygen is?

Accepted Answer

-118°C

Answer

400°C

Answer

20°C

Answer

36.5°C

Question 9

Critical temperature for liquid nitrogen is ?

Accepted Answer

-147°C

Answer

36.5°C

Answer

-20°C

Answer

-242°C

Question 10

In which vein is Central Venous Pressure (CVP) most accurately monitored?

Accepted Answer

Internal jugular vein

Answer

Anterior jugular vein

Answer

External jugular vein

Answer

Inferior vena cava

Anesthetic Equipment and Monitoring — MCQs

Anesthetic Equipment and Monitoring — MCQs

On this page

Practice by Chapter

Want unlimited practice?