Anesthetic Equipment and Monitoring Practice Questions

Q: Resistance of the tube shown below is primarily because of

Diameter. ***Diameter*** - According to **Poiseuille's law**, resistance to laminar flow is inversely proportional to the radius raised to the fourth power (r⁴). Therefore, even a small change in the tube's **diameter** has a profound effect on airflow resistance. - The image shows an endotracheal tube, where the internal diameter is the most critical factor determining the work of breathing for a patient, as it dictates the primary resistance to gas flow. *Curvature* - The curvature of the tube can induce **turbulent flow**, especially at high flow rates, which does increase resistance. - However, its contribution to total resistance is significantly less than that of the tube's internal **diameter**. *Circumference* - Circumference is directly proportional to the diameter (Circumference = π × Diameter), so it is related to resistance. - However, the physical principle governing flow resistance, **Poiseuille's law**, specifically uses the **radius (or diameter)** to the fourth power, making it the primary determinant, not circumference. *Length* - Resistance is directly proportional to the **length** of the tube. A longer tube will have more resistance than a shorter one of the same diameter. - While length is a factor, its effect is linear, whereas the effect of the **diameter** is exponential (to the fourth power), making diameter a much more significant variable.

Q: Which of the following is a dimension of the medical device shown?

Diameter. ***Diameter*** - Endotracheal tubes (ETTs) are primarily sized by their **internal diameter (ID)**, measured in millimeters (mm). This measurement is crucial for selecting the appropriate tube size to ensure adequate ventilation and minimize airway trauma. - The ID directly affects **airway resistance** and the work of breathing; a larger ID results in lower resistance. The size is clearly marked on the tube, for example, 'ID 7.5'. *Curvature* - While ETTs have a pre-formed curve (often called a **Magill curve**) to facilitate passage through the airway anatomy, this is a design feature, not a sizing dimension. - The curvature can be temporarily modified with a **stylet** to aid in difficult intubations, but it is not a standardized measurement used for selecting a tube. *Circumference* - Circumference is mathematically related to the diameter (Circumference = π × Diameter), but it is not the standard clinical measurement used for sizing ETTs. - The universal convention in anesthesiology and critical care is to refer to the tube's **internal diameter**, not its circumference, for selection and documentation. *Length* - The length of the ETT is important for determining the correct **depth of insertion** into the trachea, which is guided by the centimeter markings along the tube. - However, length is a secondary parameter related to placement, whereas the **internal diameter** is the primary dimension used to select the correct *size* of the tube for the patient.

Q: A 70-year-old patient with bilateral avascular necrosis of hip joint is undergoing total hip replacement in general anesthesia. The device shown below is used for?

Prevent hypothermia. ***Prevent hypothermia*** - The device shown is a **forced-air warming blanket** (e.g., Bair Hugger), which blows warm air over the patient to maintain normothermia. - Preventing **intraoperative hypothermia** is crucial, especially in elderly patients undergoing general anesthesia, to reduce complications like cardiac events, bleeding, and prolonged recovery. *Improving oxygen levels before induction of GA* - Improving oxygen levels usually involves **pre-oxygenation** using a face mask with 100% oxygen, not a warming device. - This device is not designed to deliver oxygen to the patient's respiratory system. *Allay anxiety of patient* - Patient anxiety is typically addressed with **premedication** (e.g., benzodiazepines) or psycho-supportive measures. - While comfort from warmth might indirectly reduce anxiety, it is not the primary purpose of this medical device. *Reduce carbon dioxide levels before induction of GA* - Reducing carbon dioxide levels (e.g., in hypercapnia) is typically achieved through **ventilation** adjustments or increasing respiratory rate/depth. - This warming device has no mechanism to alter a patient's CO2 levels.

Q: The given carbon dioxide absorber canister is showing absorbent exhaustion. Which indicator dye is responsible for this color change?

Ethyl violet. ***Ethyl violet*** - **Ethyl violet** is a common pH indicator dye used in carbon dioxide absorber canisters. - It changes from **purple** (alkaline, active absorbent) to **white/colorless** (acidic, exhausted absorbent) as CO2 is absorbed. *Phenolphthalein* - **Phenolphthalein** is another pH indicator, but it turns from colorless in acidic conditions to **pink/fuchsia** in alkaline conditions. - It is not typically used for CO2 absorbent exhaustion as its color change indicates alkalinity, not the depletion of CO2 absorption capacity in this context. *Mimosa 2* - **Mimosa 2** is not a commonly recognized or utilized indicator dye for carbon dioxide absorbents in medical or industrial applications. - This option is generally irrelevant to the standard practices of CO2 absorbent monitoring. *Clayton yellow* - **Clayton yellow** is a pH indicator that changes from yellow to amber. - It is not used in CO2 absorbents to indicate exhaustion.

Q: Identify the parts of intravenous cannula:

X= Luer lock, Y= Flashback chamber. ***X= Luer lock, Y= Flashback chamber*** - **X** correctly identifies the **luer lock** mechanism, which provides a secure, leak-proof connection to IV lines or syringes. - **Y** correctly identifies the **flashback chamber**, where blood appears upon successful vein entry. *X= Luer connector, Y= Flashback chamber* - While a **luer lock** is a type of luer connector, "luer connector" is a broader term, and "luer lock" is more specific to the threaded connection shown at X. - **Y** is correctly identified as the flashback chamber. *X= Bushing, Y= Catheter hub* - **X** is not a bushing; a bushing is typically a component used to insulate or guide. The structure at X is the **luer lock**. - **Y** is the flashback chamber, whereas the **catheter hub** refers to the wider plastic part where Y connects, and where the wings attach. *X= Bushing, Y= Injection port* - **X** is incorrectly identified as a bushing; it is the **luer lock**. - **Y** is the flashback chamber, not an **injection port**, which is a separate opening (often with a rubber diaphragm) for administering medication without disconnecting the IV line.

Q: For the following recording and display, which wavelength of light is used?

660 nm and 940 nm. ***660 nm and 940 nm*** - Pulse oximeters, as depicted in the image, utilize two specific wavelengths of light: **660 nm (red light)** and **940 nm (infrared light)**. - These wavelengths are chosen because **oxyhemoglobin** and **deoxyhemoglobin** have significantly different absorption characteristics at these points, allowing the device to differentiate between them and calculate oxygen saturation. *480 nm and 640 nm* - While 640 nm is close to red light, 480 nm falls in the blue-green spectrum, which is not primarily used for **oxygen saturation measurement** in standard pulse oximetry. - Using these wavelengths would not provide the clear differentiation in light absorption by oxyhemoglobin and deoxyhemoglobin needed for accurate readings. *320 nm and 640 nm* - A wavelength of 320 nm is in the **ultraviolet (UV) spectrum**, which is harmful and not used for continuous monitoring in pulse oximetry. - The combination of a UV wavelength and a red light wavelength is not employed for the principle of **differential light absorption** by hemoglobin species. *160 nm and 320 nm* - Both 160 nm and 320 nm are in the **ultraviolet (UV) spectrum** and are not safe or effective for use in pulse oximetry. - These wavelengths would be strongly absorbed by various tissue components, making it impossible to accurately measure **oxyhemoglobin** and **deoxyhemoglobin** concentrations.

Q: The machine shown below is used for \qquad :

General anesthesia. ***General anesthesia*** - The image displays an **anesthesia machine** (also known as an anesthetic workstation), which is an essential piece of equipment used to deliver medical gases and volatile anesthetic agents to a patient, maintain their ventilation, and monitor vital signs during general anesthesia. - Key components visible that identify it as an anesthesia machine include the **vaporizers** (bottles for liquid anesthetic agents), flow meters for gases, a ventilator circuit, and a patient monitor for displaying physiological parameters. *Hemodialysis* - Hemodialysis machines are used for **filtering waste products and excess fluid from the blood** in patients with renal failure. - They typically feature a **dialyzer** (artificial kidney), blood pumps, and systems for preparing dialysate, which are not visible in the provided image. *Extracorporeal membrane oxygenation* - ECMO machines provide **cardiac and respiratory support** by oxygenating the blood outside the body, essentially acting as an artificial lung and/or heart. - These systems involve an **oxygenator**, blood pumps, and cannulae for connecting to the patient's circulatory system, none of which are characteristic of the equipment shown. *Peritoneal dialysis* - Peritoneal dialysis involves **filtering blood inside the patient's body** using the peritoneum as the filter, with fluid exchanged manually or by a cycler. - The equipment for peritoneal dialysis, such as **cyclers or dialysate bags**, looks distinctly different from the complex gas delivery and monitoring system depicted.

Q: The following cannula is \qquad guage:

16. ***16*** - The cannula in the image has a **gray hub**, which corresponds to a **16-gauge** intravenous cannula. - 16-gauge cannulas are typically used for rapid fluid administration, blood transfusions, and in emergency situations when large bore access is required for critical care. *14* - A **14-gauge** cannula is characterized by an **orange hub** and is the largest common size, used for extremely rapid fluid delivery in major trauma or resuscitation. - The color of the cannula in the image is gray, not orange, ruling out 14-gauge. *18* - An **18-gauge** cannula has a **green hub** and is a common size for routine blood transfusions, infusions, and sometimes in surgery. - The color of the cannula in the image is gray, not green, indicating it is not an 18-gauge cannula. *20* - A **20-gauge** cannula has a **pink hub** and is suitable for most infusions, routine blood draws, and for patients with relatively stable veins. - The cannula in the image is gray, not pink, so it is not a 20-gauge.

Q: The device shown can deliver FiO2 up to ____ :

100%. ***100%*** - Oxygen hoods, as pictured, are designed to deliver a specific and controlled **fraction of inspired oxygen (FiO2)** directly around an infant's head. - They allow for the delivery of **pure oxygen (100%)**, often mixed with air to achieve the desired FiO2, which can be monitored very closely for neonatal respiratory support.

Q: All of the following sites are used for the route of adrenaline administration shown below except:

Ischial spine. ***Ischial spine*** - The ischial spine is a pelvic landmark and is absolutely **not a site for intraosseous (IO) access** due to its deep location, proximity to vital structures, and lack of accessible bone marrow. - Using the ischial spine for IO access would be **dangerous and ineffective**, risking injury to nerves, blood vessels, and adjacent organs. *2 cm below tibial tuberosity* - This is a common and **appropriate site for intraosseous (IO) access** in adults and children. - The **proximal tibia** offers readily accessible bone marrow and a strong cortical bone for needle insertion. *2 cm superior to medial malleolus* - This location on the **distal tibia** is another recognized and suitable site for IO access, particularly in pediatric patients or when other sites are unavailable. - It provides a safe and effective entry point into the **bone marrow cavity**. *Greater tubercle of humerus* - The **proximal humerus**, near the greater tubercle, is a crucial and increasingly preferred site for IO access, especially in adults. - It offers a rapid flow rate and is often chosen in **emergency situations** when IV access is difficult to obtain.

Question 1

Resistance of the tube shown below is primarily because of

Accepted Answer

Diameter

Answer

Curvature

Answer

Length

Answer

Circumference

Question 2

Which of the following is a dimension of the medical device shown?

Accepted Answer

Diameter

Answer

Curvature

Answer

Circumference

Answer

Length

Question 3

A 70-year-old patient with bilateral avascular necrosis of hip joint is undergoing total hip replacement in general anesthesia. The device shown below is used for?

Accepted Answer

Prevent hypothermia

Answer

Improving oxygen levels before induction of GA

Answer

Allay anxiety of patient

Answer

Reduce carbon dioxide levels before induction of GA

Question 4

The given carbon dioxide absorber canister is showing absorbent exhaustion. Which indicator dye is responsible for this color change?

Accepted Answer

Ethyl violet

Answer

Phenolphthalein

Answer

Mimosa 2

Answer

Clayton yellow

Question 5

Identify the parts of intravenous cannula:

Accepted Answer

X= Luer lock, Y= Flashback chamber

Answer

X= Luer connector, Y= Flashback chamber

Answer

X= Bushing, Y= Catheter hub

Answer

X= Bushing, Y= Injection port

Question 6

For the following recording and display, which wavelength of light is used?

Accepted Answer

660 nm and 940 nm

Answer

480 nm and 640 nm

Answer

320 nm and 640 nm

Answer

160 nm and 320 nm

Question 7

The machine shown below is used for \qquad :

Accepted Answer

General anesthesia

Answer

Hemodialysis

Answer

Extracorporeal membrane oxygenation

Answer

Peritoneal dialysis

Question 8

The following cannula is \qquad guage:

Accepted Answer

16

Answer

14

Answer

18

Answer

20

Question 9

The device shown can deliver FiO2 up to ____ :

Accepted Answer

100%

Answer

40%

Answer

60%

Answer

80%

Question 10

All of the following sites are used for the route of adrenaline administration shown below except:

Accepted Answer

Ischial spine

Answer

2 cm below tibial tuberosity

Answer

2 cm superior to medial malleolus

Answer

Greater tubercle of humerus

Anesthetic Equipment and Monitoring — MCQs

Anesthetic Equipment and Monitoring — MCQs

On this page

Practice by Chapter

Want unlimited practice?